- GARDEN WATER PUMP
- SWIMMING PUMP
- DOMESTIC WATER PUMP
- Industrial Submersible Pump
- MULTISTAGE PUMP
- OTHER PUMP
- POND SERIES
- AQUARIUM SERIES
- FILTER SERIES
- PUMP ACCESSORIES
The roots vacuum pump overload - burning motor
roots vacuum water pump in many industries, such as oil, chemical industry and plastics, if the pressure differential is too high, the overload may occur. The more serious problem is the motor burned. Here, I'll introduce you to some of the ways to prevent equipment overload and burning motor.
1, the use of hydraulic coupling, hydraulic coupler can also prevent overload
1) under normal working conditions, hydraulic coupling between the pump and motor installed, rated torque from the motor end to the pump.
(2) the roots vacuum pump pressure difference is determined by the hydraulic coupling transmission torque, and its can transfer torque by the liquid quantity to adjust.
3. When the roots vacuum pump work under high pressure or with the former pump is started at the same time, can appear inside the hydraulic coupling speed difference, namely slippage, just pass a certain torque for reduction of pump.
(4) as the extraction of gas load decreases gradually and gradually accelerated to the rated speed.2, using vacuum electronics control pump inlet pressure
1) install a pressure gauge in the inlet pipe, such as vacuum gauge or vacuum electric contact pressure gauge.
(2) the vacuum system after the start, when the pressure is lower than the given value, at the entrance pressure sensor will send signal and the electrical control system to open it.
3. If the roots vacuum water pump inlet pressure is higher than the specified value, the pump bypass valve automatically closed or opened at the same time, to ensure the reliable operation of the equipment.
in order to prevent the roots vacuum pump overload burning motor, we can in the process of operation control switch, turn off the power supply in time after work, and routine maintenance and cleaning. This is not a good way to delay work.
The water pump approach to winter cover pump is becoming increasingly popular; consequently, there is a surge in the demand for .
If you would like to learn more about , be sure to visit J&T INDUSTRY for more information!
The engineers and developers of J&T INDUSTRY CO.,LTD. are the best in their own professional way and we guarantee to provide related service to our dear customers.