this series SPA pump is most mature product and preferred series for medium and high class hydro massage bathtub. Liquids part is made of high reinforce engineering plastic; Applied mechanical seal type ensure watertight in long-time continuous operation. The liquid will be drained once motor is off.
|P1||Q MAX L/MIN||HMAX M||Amps||Fitting size (mm)||Packing size (mm)||GW (kgs)|
|WP200-2||(low speed) 0.35||3/8||620||14||2||60.3or63||470*235*295||15.5|
|WP250-2||(low speed) 0.4||1/2||670||16||2.5||60.3or63||470*235*295||17|
|WP300-2||(low speed) 0.45||5/8||730||18||3||60.3or63||470*235*295||18.5|
|220-240V/50HZ,110V/60HZ, models are available on request|
Air cooling motor is suitable for Europe.
Motor Frame and base is conjoined with material of aluminum; This series is available that material of base is high reinforcing engineering plastic.
Motor is under low-noise and less-vibration and durability that are specialized for hydro massage bathtub or SPA pump.
Insulation class F, protection IPX5, continuous duty; Single-phase with thermal protector from T1 to ensure safety and convenience. Pneumatic switch control is available.
① It's suitable for hydro massage tube or SPA system and circulation or filter of swimming pool system.
② It's used to transmit and cycle sea-water for fish pond water which is a preferred sea-water pump.
③ Weak corrosive liquid (weak acid and weak) without solid granules. Liquid temperature: +5-60C.
④ It's suitable for circulating water equipment that use for workshop's cooling-down.
Thermal protector: single phase
Medium temperature: 5-50℃
Environmental temperature: ≤50℃
Max.working pressure: 0.3MPa