Home  > INFO CENTER  > BLOG  > 

How to maintain swimming pool pumps

How to maintain swimming pool pumps


Swimming pool pumps belong to circulating water equipment, also known as pool circulation pumps. It is one of the important equipment for swimming pool engineering, and it is an important guarantee for the circulating water supply of swimming pools. Therefore, the correct use and maintenance of swimming pool pumps in daily work is very necessary. The swimming pool pumps are equipped with filter sand tanks, so that while the water is circulating, the swimming pool can also be cleaned daily.

First of all, the swimming pool pump needs to be checked before turning on: adjust the filter sand tank to the filter state; check the valve; check whether the hair collector is blocked, whether there is air, and if so, clean it in time; check whether the lid is leaking (the lid cannot leak) , To be tightened); inspection of the drug canister. Check whether air accumulates in the main return water pipeline, if any, it must be removed through the drain valve.

The second is the start-up operation: first turn on a water pump motor. After the water pump motor is running normally, turn on the water pump that needs to be used. The standby pump is of course placed on standby and does not need to be turned on.

Then: after booting, it is not completed, we have to observe whether the swimming pool pump is operating normally, such as recording the pressure gauge index on the filter, checking whether backwash is required; checking the pump operation, whether it is running smoothly, and no noise; checking each dosing system Whether it is operating normally; go to the swimming pool to visually check whether each water injection port is normal. In short, it is to check whether all its components are normal. If a problem is found, you need to find the cause of the problem and solve it.

Note: The swimming pool pump has many functions, different functions, we need to pay attention to different aspects: for example, the filter function we need to pay attention to whether there is clogging, whether there is inflation, etc.; filter backwash function: first we have to look at the filter sand tank The reading of the pressure gauge is 2.5kg/cm2 or more, you need to immediately backwash the filter sand tank, and then use it according to the instructions. Observe the water mirror during use, and turn off the backwash pump after cleaning; during the drainage process We must try our best to prevent the pump from being interrupted.

In fact, as long as we are very familiar with the operating instructions of swimming pool pumps, and strictly follow the instructions on the instructions. Then, we talk about maintenance: the regular use of the swimming pool is the maintenance of the swimming pool, followed by: the maintenances of the swimming pool pump should do the following:

a. Check and clean the sand tank regularly.

b. Periodically check the seal ring of the pump head cover. If damaged, please replace it in time.

c. Keep the motor clean and keep the air outlet of the motor smooth.

d. In accidental situations, the shaft seal ring of the motor will be worn out and should be replaced in time.

e. In winter, the accumulated water in the pump head should be removed, the inside and outside of the pump should be cleaned, and the pump should be stored in a dry and well-ventilated room.

Chat Online 编辑模式下无法使用
Chat Online inputting...