Whirlpool bath pump, bathtub pump: WM series hot tub SPA bathtub pump is in small size. Motor is adopted small motor frame. It's suitable for massage bathtub that installation space is restricted. The pump casing is same as DH1.0 series. Liquids part is made of high reinforce engineering plastic; Applied mechanical seal type ensure watertight in long-time continuous operation.
Fitting size (mm)
Packing size (mm)
220-240V/50HZ,110V/60HZ, models are available on request
Air cooling motor is suitable for Europe.
Motor Frame and base is conjoined with material of aluminum; This series is available that material of base is high reinforcing engineering plastic.
Motor is under low-noise and less-vibration and durability that are specialized for hydro massage bathtub or SPA pump.
Insulation class F, protection IPX5, continuous duty; Single-phase with thermal protector from T1 to ensure safety and convenience. Pneumatic switch control is available.
① It's suitable for hydro massage tube or SPA system and circulation or filter of swimming pool system.
② It's used to transmit and cycle sea-water for fish pond water which is a preferred sea-water pump.
③ Weak corrosive liquid (weak acid and weak) without solid granules. Liquid temperature: +5-60C.
④ It's suitable for circulating water equipment that use for workshop's cooling-down.
◪ 5-8 nozzles for single bathtub: WM75/WM100
◪ 8-10 nozzles for double bathtub: WM120
① Bathtub's size/the number of nozzle/request flow/pressure etc.
② Applied region's voltage and frequency (220-240V/50Hz\220-240V/60Hz is available)
③ Applied region's request for safety certificate.
④ Request for fitting size(48.5mm, 50mm is available)
⑤ Type of plug. (No Plug or Europe plug, UL plug is available.)
Medium temperature: 5-50℃
Environmental temperature: ≤50℃
Max.working pressure: 0.3MPa